SUDDEN HOT WATER SYSTEM FAILURE: WHAT TO DO RIGHT NOW

Sudden Hot Water System Failure: What to Do Right Now

Sudden Hot Water System Failure: What to Do Right Now

Blog Article

Call

What're your thoughts about How to Troubleshoot and Repair an Electric Water Heater?



Many modern homes take advantage of an electrical water heater for their heating system, as a result of its ease and also convenience of use. Nonetheless, just like any other electric devices, issues might develop with its usage, unexpectedly. It can be actually irritating to get up to a chilly shower instead of a warm one or having your bathroom with water that isn't hot enough or perhaps also hot. Whatever the case might be, water heater problems can be fairly aggravating. Luckily, we've made a list of feasible services to your hot water heater problems. There are a number of variables that might create most of these problems, it could be a concern with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you switch off the main power supply for safety and security. Whatever the issue is, getting it repaired need to not present excessive of a problem if you follow these steps:

Check Your Power Supply:


As standard as this may appear, it is very needed. Without ample power, your hot water heater will certainly not function. So the first thing to do when your water instantly retires is to verify that it isn't a power issue. Examine if the fuse is blown out or the circuit breaker stumbled. If the breaker is the issue, merely transform it on and off again. Replace any type of broken or worn-out fuse. Check the appliance with power after these modifications to see if it's currently functioning.

Inspect the Heating Element in the Hot Water Heater:


If it's not a power problem, then try having a look at your heating element if it is still working. Examine each of your heating elements to ensure the problem isn't with any one of them. If any one of them is faulty, replace that component and after that examine whether the hot water is back on.

Check Your Thermostat:


If your water heater still isn't functioning or the water appearing isn't hot enough, you may require to examine the temperature settings on your upper thermostat. Make sure the breaker is turned off before doing anything. Open the gain access to panel and also press the red switch for temperature reset above the thermostat. This need to help heat up the water. Transform the circuit breaker back on and inspect if the issue has actually been resolved.

Call A Professional:


If after changing all faulty parts and resetting your temperature level, the water heater still isn't working, you may require to call a professional plumber for a professional viewpoint. The trouble with your heating unit could be that the hot and cold taps have actually been changed or it might be undersized for the amount of warm water required in your home. Whatever the case might be, a specialist plumber would help address the issue.

Verdict


Water heater problems are not always major. Most of them are because of minor problems like a blown fuse or worn-out heating element. Replacing the defective parts should do the trick. However, if you are still unable to solve the problem, give a call to your nearest plumber to come to get it fixed.

8 possible reasons why you have no Hot Water


Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.


Water Leak


Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.



Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.


Gas Heater: Gas Leak


If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.


Gas Heater: Pilot Light Problems


There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.



Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.


Gas Heater: Faulty Thermocouple


The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.


Electric Heater: Breaker Blues


Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.


Electric Heater: Reaching The Limit


If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.


Electric Heater: Heating Element


If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.

https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/


How to Troubleshoot and Repair an Electric Water Heater

Hopefully you enjoyed our section about How to Troubleshoot and Repair an Electric Water Heater. Many thanks for taking time to read our article. If you enjoyed reading our page plz don't forget to pass it around. We enjoy reading our article about No Hot Water — Water Heater Repair.


View

Report this page